Gefen EXT-UHDV-KA-LANS-RX, Руководство пользователя, Страница: 37 / 188

B
asic Oper
ation
B
asic Oper
ation
Configuring Unicast Mode
The term unicast is used to describe a configuration where information is sent from one
point to another point. It is possible to have multiple Sender and Receiver units connected
in a system. However, in unicast mode a Sender unit can communicate with only one
Receiver unit at a time. In unicast mode, the 4K Ultra HD HDMI & VGA KVM over IP
functions similar to a KVM switcher.
The illustration, below, shows 3 Sender units (S1, S2, and S3) and 2 Receiver units
(R1 and R2) on a network, operating in unicast mode. The video channels are notated
in blue.
Figure 2.1 - Unicast mode: A Sender unit can communicate with only one Receiver unit at
a time.
1. Access the Web interface for each Sender and Receiver unit that will be using
unicast
mode . In this example, we will start with Receiver unit R1.
2. Login as “Administrator”.
LAN
Receiver unit
Receiver unit
Out
Out
Sender unit
Sender unit
Sender unit
In
In
In
R
1
R
2
S
2
S
3
S
1
2
1
5
1
2
Information
The 4K Ultra HD HDMI & VGA KVM over IP Sender and Receiver units
shipped from the factory in
unicast mode
.
Tip
In unicast mode , the 4K Ultra HD HDMI & VGA KVM over IP behaves as a
KVM Switcher.
Unicast & Multicast Modes
page | 25