Gefen EXT-UHDV-KA-LANS-RX Скачать руководство пользователя страница 26

Страница: 26 / 188

page | 14

tting S

tar

ted

Supplementary Connections

►

USB

See

USB Control (page

)

for more information on using USB devices.

Connect a USB cable from the computer to the

USB

port on the Sender unit.

Connect a maximum of four USB devices to the Receiver unit. Note that both USB

2.2 and USB 1.1 ports are supplied.

►

Connect an IR Emitter (Gefen part no. EXT-IREMIT) to the Sender unit and attach

it to the IR sensor on the device to be controlled.

Connect an IR Extender (Gefen part no. EXT-RMT-EXTIRN) to the Receiver unit if the

IR sensor will not be within line-of-site for proper IR control.

►

Audio

See

Audio Connections (page 46

)

for more information on using audio devices.

5. Connect a 3.5mm mini-stereo cable from the

Line In

port on the Sender unit to an

audio source.

Connect a pair of powered speakers (or another audio output device) to the

Line Out

port on the Receiver unit.

Connect a USB microphone / headset to one of the

USB 2.0

ports on the Receiver

unit

Connect a pair of powered speakers (or another audio output device) to the

Line Out

port on the Sender unit.

►

RS-232

Connect an RS-232 cable from the PC or automation system to the

RS-232

port on

the Sender unit.

10.

Connect an RS-232 cable from the Receiver unit to the RS-232 device to be

controlled.

Installation & Configuration

tting S

tar

ted

Содержание EXT-UHDV-KA-LANS-RX





























































































































































































Результаты поиска

Содержание EXT-UHDV-KA-LANS-RX

Отзывы:

Gefen EXT-UHDV-KA-LANS-RX, Руководство пользователя, Страница: 26 / 188

Результаты поиска

Содержание EXT-UHDV-KA-LANS-RX

Отзывы: