Gefen EXT-UHDV-KA-LANS-RX, Руководство пользователя, Страница: 19 / 188

page | 7
The 4K Ultra HD HDMI & VGA KVM over IP Sender and Receiver units can be connected
over a Local Area Network (LAN) or they can be directly connected to one another. Both
installations will be covered.
Local Area Network (LAN) Connection
In order to connect the 4K Ultra HD HDMI & VGA KVM over IP to a Local Area Network
(LAN), both the Sender and Receiver unit must first be set to DHCP mode or Static IP
mode. DHCP mode will use the DHCP server to automatically assign an IP address for
each Sender and Receiver unit that is connected to the network. Static IP mode will allow
the IP address for each Sender and Receiver unit to be configured manually. Contact your
network administrator if necessary.
1. Connect an HDMI cable from the UHD/HD source to the HDMI In port on the Sender
unit.
2. Connect a VGA cable from the VGA In port on the Sender unit to the VGA source.
3. Connect a VGA cable from the VGA OUT port on the Sender unit to a local monitor.
4. Connect an HDMI cable from the UHD/HD display to the HDMI Out port on the
Receiver unit.
5. Connect a VGA cable from the VGA Out port on the Receiver unit to a display.
6. Connect a CAT-5e (or better) cable between the LAN (PoE) port on the Sender unit
and a Gigabit IP switch.
7. Connect LAN 3 (PoE) on the Receiver unit to the same network switch. Each cable
run can be up to 330 feet (100 meters).
8. If
NOT USING
A PoE-compliant switch, then connect the included 5V DC power
supplies to the Sender and Receiver unit.
Ge
tting S
tar
ted
Installation & Configuration
Important
If the IP switch is PoE-compliant and the Sender and Receiver are connected
through their PoE ports, external power supplies will not be required.
Additional Receivers or other devices connected to LAN 1 and LAN 2 ports of
a Receiver will however need to be powered locally.
Power
RS-232
Off On
Prog Sel IR Out
IR In/Ext Prog Reset VGA Out
Link
4K Ultra HD HDMI & VGA KVM over IP S
®
EXT-UHDV-KA-LANS-TX
5V DC USB LAN (PoE) VGA In HDMI In Line In Line Out
Sender unit
Connect to LAN / DHCP server