Geely JL481Q, Руководство пользователя, Страница: 69 / 198

(7) Make sure the rotation of injector is stable. If not, it may be most likely caused by incorrect mounting of O-ring. There-
fore, replace such O-ring (Fig. 157).
(8) Fasten the two bolts on the intake manifold used to fix the delivery pipes, with torque of 15 N.m. (Fig. 158)
21. Connect the inlet fuel hoses to delivery pipes. The torque for fastening two bolts is 29N.m (Fig. 159)
Connect the inlet fuel hose of Jl481Q/MR481QA to the delivery pipe and clip it with two clips.
22. Connect the engine wire harness. Fix the wire harness support with two nuts (Fig. 160).
23. Mount water bypass hoses and fuel return hoses.
(1) Use two bolts to install water bypass hoses and fuel return hoses onto intake manifold with torque of 10.2 N.m.
Fig. 158 Fasten the bolt on the intake manifold that fixes the pipe Fig. 159 Connection between the fuel hose and pipe
Fig. 155 Method of fixing injector onto the delivery pipe
Fig. 154 Smear a thin layer of gasoline onto
each side O-rings when mounting injector
Fig. 156 Method of mount injector and
transmission pipe to intake manifold
New O-ring
ROTATING
UPWARD
Fig. 157 Check whether O-ring of injector is correctly mounted
65