Geely JL481Q, Руководство пользователя

Страница: 34 / 198

Fig. 16 Detach the AC Generator Belt
Fig. 18 Detach the Exhaust Manifold
Fig. 17 Detach the Generator Connectors and Wires
Fig. 20 Detach the No.2 Water Inlet Connecting flange
(1)
(2)
(4)
(3)
6. Remove the cylinder head cover.
connection(2), the oil pressure switch connector (3), and
the wire clip (4). Detach the wire harness, remove the
compulsory ventilation PCV hose of crankcase, remove
the 4 lock nuts and the seal pad, and remove the cylinder
head cover and the gasket (Fig. 17).
7. Remove the AC generator.
8. Remove the exhaust manifold (Fig.18).
9. Remove the phase sensor.
10. Remove the intake manifold.
11. Remove the oil dipstick and the guide (Fig.19).
12. Remove the No.2 water inlet flange and the gasket
(Fig.20).
13. Remove the No.3 and No.2 timing belt cover.
14. Set the No.1 cylinder at TDC of compression stroke.
(1)Turn the crankshaft pulley gently to align the “V”
groove with the timing mark “O” on the No.1 timing belt
cover (Fig. 21).
Fig. 19 Disassemble the Oil dipstick and guide tube
Fig. 21 Align with the Timing Mark on No.1 Timing Belt
30
Detach the
generator connector (1),
the
wire