Geely JL481Q, Руководство пользователя

Страница: 66 / 198

(2) After the bolt of pulley has been fixed, fix the hex. head of camshaft to fasten the bolt of timing pulley with torque of 59
N. m
9. Install the frame of AC generator
Install the frame of AC generator with three bolts with torque of 31N.m.
10. Mount the timing pulley
Inspect whether matching mark on the timing belt match the mark on the end of #1 belt cover. If not, move the wheel until
they are matched. Align the mark on the timing belt with the mark on the timing pulley. (Fig. 142, 143)
Before mounting, wipe clean all oil and water on the surface of camshaft timing pulley and keep a clean surface. After
mounting, inspect whether the tension force between crankshaft timing pulley and camshaft timing pulley is normal.
11. Inspect valve timing
(1) Loosen the belt tensioner bolt (Fig. 144).
(2) Rotate the crankshaft for two cycles, starting from the TDC of cylinder I and returning to the TDC after two circles. Be
noted to rotate clockwise.
(3) Inspect whether each pulley aligns with the timing mark in Fig. 145. If not, re-install them.
(4) Tighten the belt tensioner bolt with torque of 37N.m.
(5) Put on rubber seal ring onto #1 timing belt cover.
Fig. 142 Check the matching mark on the timing belt
Fig. 144 Check the tension force of timing pulley Fig. 145 Adjust valve timing
Fig. 143 Align the matching mark on the
timing belt and camshaft timing pulley
62