Geberit ECO 201, Руководство по эксплуатации, Страница: 19 / 268

B29
9
-0
01&B
D
C © 0
2
-2
00
6
Operating instructions ECO 201
Ensure the diameter of the pressfitting matches the
1
diameter of the pressing jaw
2
Connect the pressing tool to the power supply
EN
Place the pressing jaw onto the pressfitting, see the
3
operating instructions for the pressing jaws
Press the start button and hold it for about two seconds
4
until the automatic pressing function activates
Wait until the roller drive moves back automatically 5
Release the pressing jaw from the pressfitting
6
Troubleshooting
Before the pressing operation
Operating status Cause Actions
No LED lights up The mains cable is not Connect the mains connector to the power
connected supply
Mains cable or mains Have the mains cable and mains connector
connector is faulty checked by a trained electrician and have them
replaced if necessary by an authorised specialist
workshop
Green LED flashes Locking pin is not Press the locking pin in as far as the stop
pushed in correctly
During the pressing operation
Operating status Cause Actions
Green LED flashes and Locking pin has come • Check the locking pin for damage
roller drive moves back to loose • Press the locking pin in as far as the stop:
its starting position Signal tone sounds and red LED lights up
• Press start button
• Check the pressfitting for leaks and repeat the
pressing operation if necessary
19