Commissioning
Basics of commissioning
7160-9001-560
01. December 2020
Menu item: Maintenance -> System -> Update
Function(s):
● Firmware update
Button
Description
File
Update with file
For more information on this subject, please refer to the section on
Maintenance
Internet-Update
Update via internet (only with an available
internet connection)
(only applies to
CowScout)
Menu item: Maintenance -> Devices -> Identification
Function(s):
● Information on connected transceivers
Example:
Antenna status (VP1801)
A
2
3
4
5
6
7
1
8
9
10
Set-up
Description
1 - Antennas
(logical address) designation
Example: (2) VP1801 Ant 1
2 - Mode
Type of communication identified by the transceiver (FDX / HDX / ISO)
3 - Imp
Automatic antenna resonance equalisation
● Antenna impedance
4 - Tuned
● Status display (LED)
● Start automatic resonance equalisation (Autotune Command)
Click on the area to do this (A)
5 - Tune position
● Status display
6 - Error
Error display
7 - Signal FDX
8 - Signal HDX
Current signal strength displayed
● Black: responder identified
● Green to red: weak to strong background noise
9 - ID
Identification status
● F: responder read (FDX)
● H: responder read (HDX)
● : interference signal (no display)
● off: antenna not active
Button:
10 - Start Sync Test
Check transceiver synchronisation
