GEA Aseptomag RVIN, Инструкция по эксплуатации

Страница: 39 / 56

Caution!
Danger of injury due to valve parts moved by compressed air!
You can sustain injuries to your fingers when you put your hand into the
valve while it is switching.
► Wear protective gloves for all work.
► Always exercise caution and prudence.
Requirement:
•
Internal assembly and actuator have been separated from the housing
Section 10.7, Page 36.
Carry out the following steps:
1. Move the actuator to a horizontal position.
! The T-slot in the piston rod must point upwards.
Bring the actuator to the "open" position.
Fig.20: Extending piston rod with groove upwards
2.
Lift the internal assembly slightly to detach it from the T-slot on the drive
spindle.
Fig.21: Unhooking the internal assembly
3. Remove the housing seal without a tool.
! Do not damage the sealing surfaces on the housing and internal
assembly.
Fig.22: Removing housing seal
Maintenance
Disassembling and Assembling the Internal Assembly
430BAL011926EN_1
30.08.2019 39