GEA Aseptomag RVIN, Инструкция по эксплуатации

Страница: 38 / 56

Fig.19: Removing actuator and internal assembly
®
Internal assembly and actuator are now separated from the housing.
10.7.2 Installing the valve
Tools required:
• Hex socket key
Carry out the following steps:
1.
Install the valve in the reverse order of disassembly, see Section 10.7.1,
Page 36.
! Note “Torques for clamps” table, see Section 10.7.3, Page 38
2.
Test the function of the valve after installing.
! Every possible position must be activated and held for 3-5 seconds to
assure proper assembly and sealing.
®
The valve has been assembled.
10.7.3 Torques for clamp
Clamp screw thread size Recommended torque [Nm]
M6 10
M8 20
10.8 Disassembling and Assembling the Internal Assembly
10.8.1 Removing the internal assembly
Maintenance
Disassembling and Assembling the Internal Assembly
430BAL011926EN_1
38 30.08.2019