GEA Aseptomag RVIN, Инструкция по эксплуатации

Страница: 43 / 56

1.
Bring the actuator to the non-actuated position.
2. Remove the feedback unit.
3. Attach the clamping piece on the rear of the actuator.
Fig.28: Attaching clamping piece
4.
Clamp the actuator at the clamping piece into the vice .
Fig.29: Clamping the actuator
®
Disassembly has been prepared
Removing assembly spring
Carry out the following steps:
1.
Turn the actuator base counter-clockwise using a flexible head spanner , see
illustration.
! Rotate the actuator base until the assembly spring begins to move out of the
slot in the cylinder.
Maintenance
Disassembling and Assembling Actuator PA80 - PA255
430BAL011926EN_1
30.08.2019 43