GE Profile PT920, Техническое обслуживание руководство, Страница: 30 / 47

– 30 –
( Continued Next Page )
To remove the bake FAD thermal switch on single
and upper double ovens:
The bake FAD thermal switch is located on the back
top side of the wall oven. (See
Component Locator
Views
).
Remove the wall oven from installation. (See 1.
Oven Removal
.)
Remove the back, top side access panel. 2.
Disconnect wires; remove two 1/4-in. hex-head 3.
screws and the thermal switch.
Thermal Switch
Door Hinge Receivers
To remove the door hinge receivers:
Remove the oven from the installation. (See 1.
Oven
Removal
.)
Remove the appropriate side access panel for 2.
the door hinge receiver. (See
Side Access Panels
.)
Carefully lift the insulation from the outside of 3.
the oven.
Remove the four T-15 Torx screws (2 on each 4.
side) that hold each hinge receiver to the oven
frame.
Note: Upon reassembly, ensure displaced insulation
around oven and components is returned to its
original position.
Thermal Switch
Vent Tube
To remove the bake FAD thermal switch on lower
double ovens:
The bake FAD thermal switch for lower double ovens
is located in the lower oven control compartment
behind the vent tube. (See
Component Locator Views
).
See
Lower Oven Control Compartment Access
to gain
access to the lower oven control compartment. The
bake FAD thermal switch is held in place by two
1/4-in. hex-head screws.