GE Profile PT920, Техническое обслуживание руководство, Страница: 20 / 47

– 20 –
Lower Oven Control Compartment Access
Note: It may be necessary to remove the oven from
the installation to gain access to some components.
(See
Component Access Chart
.)
To access the lower oven control compartment:
Remove the upper oven door. (See 1.
Door
Assembly
.)
Remove the 2 Phillips-head screws from the top 2.
of the middle trim.
Open the lower oven door. 3.
Remove the three 1/4-in. hex-head screws from 4.
the bottom of the middle trim. Remove the trim.
Remove the four 1/4-in. hex-head screws 5.
that attach the cross member to the front
of the control compartment. Remove the
crossmember.
Screws
Middle Trim
Top Access Panels
Removing the top access panels permits access to
the control compartment, cooling fan, and the bake
FAD thermal.
The oven must be removed to access the 1/4-in.
hex-head screws that attach the top panels. (See
Oven Removal
.)
The front top access panel has 5 hex-head screws.
The rear top access panel has 8 hex-head screws.
Remove the two 1/4-in. hex-head screws from 6.
the relay board tray.
Remove the four 1/4-in. hex-head screws (one 7.
under the relay board) that attach the vent trim
to the front of the cabinet. Remove the trim.