GE Optima XR646 Скачать руководство пользователя

Страница: 44 / 463

Chapter 2: Safety and Regulatory

5495975-1EN Rev.9

2-17

General Use Warnings

WARNING

For continued safe use of this equipment, follow the instructions con-

tained in this Operator Manual. Study this guide carefully before using
the equipment and keep it at hand for quick reference. It may be desir-

able for the facility to print this manual from a standard PC to have a

hard copy available within the Radiology department.

WARNING

Only qualified personnel trained in the operation of this equipment

should operate this system. Read and become familiar with all instruc-

tions in this manual before using this equipment. If further assistance is
needed, please contact GE.

WARNING

It is the responsibility of the owner to make certain that only properly
trained, fully qualified personnel are authorized to operate the equip-

ment. A list of authorized operators should be maintained.

WARNING

Check for obstructions before moving the system (table, gantry or

other); do not drive the system into or onto fixed objects.

WARNING

If applicable, patient connected lines, tubes, etc. shall be long enough to
allow full travel of the system and will not become pinched or pulled.

WARNING

Potential Pinch Point:

Use table foot pedals with care when lowering the

table. Clearance is limited next to the table side cover, and a pinch point

may exist for the operator.

WARNING

It is the responsibility of the operator to ensure the safety of the patient

at all times. When the table is in use the patient should be monitored by

visual observation, use of proper patient positioning, and use of the pro-
tective devices provided.

Содержание Optima XR646
































































































































































































































































































































































































































































Результаты поиска

Содержание Optima XR646

Отзывы:

Похожие инструкции для Optima XR646

Бренды по названию

Популярные бренды

GE Optima XR646, Руководство оператора

Результаты поиска

Содержание Optima XR646

Отзывы:

Похожие инструкции для Optima XR646

Бренды по названию

Популярные бренды