GE Optima XR646 Скачать руководство пользователя

Страница: 230 / 463

Chapter 9: Worklist

5495975-1EN Rev.9

9-8

The filter screen has several options for accepting or rejecting the information from the Worklist.

Table 9-3

describes the filter screen functions.

Follow this process to filter the Worklist.

Note:

The fields may be completed in any order.

1. Click [FILTER LIST] on the Worklist screen.



The Filter Screen appears

2. Select the

Show list for

option.

3. Select the

Include

options.

4. Select the

Date

option.

5. If you selected

Range

for the Date option, enter or select the

From

and

dates.

Table 9-3

Filter Acceptance/Rejection Buttons

Function

Description

Filter List

Filters the Worklist items by system or modality.



This system – procedures entered locally on the unit.



CR modality – procedures for Computed Radiography.



DX modality - procedures for digital x-ray.



All systems – procedures for all modalities.

Include

Allows you to include or exclude completed or discontinued exams in the filter.

Date

Allows you to select the date of exams to filter by.



All – procedures scheduled for any date



Range - procedures scheduled for a specified range of time



Today – procedures scheduled for the current date

From (mm/dd/yyyy)
To (mm/dd/yyyy)

When the “Range” option is selected for the date, allows you to enter dates or
pick dates from a calendar screen.

Patient Information

Allows you to filter based on data from the Patient Information screen.
Available options are:



Last Name



First Name



Accession #



Patient ID

The filter may be restricted by any or all of these fields. Leaving a field blank
means that it will not be included in the filter.

[OK]

Applies the filter and returns you to the results on the Worklist.

[CANCEL]

Clears the Filter screen and returns you to the Worklist.

Содержание Optima XR646
































































































































































































































































































































































































































































Результаты поиска

Содержание Optima XR646

Отзывы:

Похожие инструкции для Optima XR646

Бренды по названию

Популярные бренды

GE Optima XR646, Руководство оператора

Результаты поиска

Содержание Optima XR646

Отзывы:

Похожие инструкции для Optima XR646

Бренды по названию

Популярные бренды