NX591E
16
SEGMENT DESCRIPTION SEGMENT DESCRIPTION
1
Alarms
9
Tampers
2
Open/Close
10
Short Circuit & Ground Fault
3
Bypass
11
Sensor Lost
4
Zone Trouble
12
Sensor Low Battery
5
Power Trouble (AC Failure or
Low Battery)
13
Expander Trouble
6
Siren & Telephone Fault
14
Failure To Communicate
7
Test Reports
15
Zone Activity Monitor
8
Program, Download & Log Full
16
Reserved
Location 11
Special Events To Report To Email
(Phone line is good)
8 segments of Feature Selection Data
This location selects the partition(s) to include when reporting Special Events to email when the phone
line is good. To exclude any partition from reporting, simply turn off the LED corresponding to that
particular partition. Using
Table XI-1
on page 12, enter the corresponding number of the partition(s)
to include for each type of report found in Segments 1 – 8. Factory default is all partitions OFF.
SEGMENT DESCRIPTION
1
Alarm Restores
2
Telephone Fault
3
Start Download
4
Fail to Communicate, Data Lost
5-8
Reserved
Location 12
Events To Report To Pager
(Phone line is good)
16 segments of Feature Selection Data
Reporting must be enabled in the control panel for this location to function
properly.
This location selects the partition(s) to include when reporting to a pager when the phone line is good.
To exclude any partition from reporting, simply turn off the LED corresponding to that particular
partition. Using
Table XI-1
on page 12, enter the corresponding number of the partition(s) to include
for each type of report found in Segments 1 –16. Factory default is all partitions OFF
SEGMENT DESCRIPTION SEGMENT DESCRIPTION
1
Alarms
9
Tampers
2
Open/Close
10
Short Circuit & Ground Fault
3
Bypass
11
Sensor Lost
4
Zone Trouble
12
Sensor Low Battery
5
Power Trouble (AC Failure or
Low Battery)
13
Expander Trouble
6
Siren & Telephone Fault
14
Failure To Communicate
7
Test Reports
15
Zone Activity Monitor
8
Program, Download & Log Full
16
Reserved
