NX-591E
8
X.
PROGRAMMING THE MODULE
A.
USING THE LED KEYPAD
ACTION RESULT
1.
Entering the Program Mode
Enters the Program Mode.
Stay
,
Chime
,
Exit
,
Bypass
&
Cancel
LEDS will
flash.
Go To Program Code
Factory Default is
If the "Go To Program Code" is valid, the
"Service" LED will flash and the 5 function LEDs
will illuminate steady. You are now in the Program
Mode and ready to select the module to program.
2.
Selecting the Module to Program:
#
The address of this cellemetry module is 76.
The Armed LED will illuminate while it is waiting
for a programming location to be entered.
3.
Factory Defaulting the Module
#
The keypad will beep 3 times indicating that the
loading is in progress. Remember you will erase
any values you may have entered previously.
4.
Programming a Location:
Once the number of the module to be programmed has been entered, the "Armed" LED will
illuminate while it is waiting for a programming location to be entered.
If an attempt is made to program an invalid entry for a particular
segment, the keypad sounder will emit a triple error beep (beep, beep,
beep), and remain in that segment awaiting a valid entry.
To Enter a Location:
[location]
#
The Armed LED will flash. If the location is valid,
the "Armed" LED will extinguish, the "Ready" LED
will illuminate, and the zone LED’s will show the
data for the first segment of this location.
