NX-591E
9
To Change Location Data:
[changed data]
The "Ready" LED will flash to indicate a data change
in process and will continue until the data is saved.
The new data is saved.
The keypad will advance to the next segment and
display its data.
NOTE: These steps are repeated until the last segment is reached.
To Exit a Location:
#
Exits from this location. The “Ready” LED will
extinguish. The "Armed" LED will illuminate waiting
for a new programming location to be entered.
To Review The Data:
[location]
#
The Armed LED will flash. If the location number is
valid, the "Armed" LED will extinguish, the "Ready"
LED will illuminate, and the zone LEDs will show the
binary data for the first segment of this location.
(Do not enter data.)
The next segment is displayed. Each time
r
is
pressed, the data of the next segment will be
displayed for review.
Shortcuts:
Previous location.
Same location.
Next sequential location.
5.
Exiting the Program Mode:
EXIT
Exits this programming level.
