NX-591E
3
I.
GENERAL DESCRIPTION
The NX-591E is a microprocessor-controlled Cellemetry interface used to connect the NetworX series
of control panels to AMPS cellular network for event reporting. The NX-591E can be used for primary,
backup, or additional reporting when used in conjunction with the panel communicator or other
optional reporting modules. Flexible event selection allows only specific messages to be reported,
keeping airtime to a minimum. The NX-591E has 14 LEDs to provide extensive diagnostic and setup
information.
II.
ACTIVATION VIA WEBSITE
The cellemetry unit can be activated and managed via our web site address:
www.gesecurity.com/cellemetry
If your company already has an account set up, proceed to step 1 below. Otherwise, you must first
set up a dealer account.
1.
At the bottom of the web page, click on the activation link which takes you to the member
login screen.
2.
Type your Login Name and Password, then click
Login
To set up a new
dealer account
Activation &
management of
units.
