manualshive.com logo in svg

GE N60, Инструкция по эксплуатации

"Подробное руководство по эксплуатации для Nectre Fireplaces N60 доступно для скачивания бесплатно на нашем сайте. Этот мануал поможет вам освоить все функции и возможности этого камина. Скачайте инструкции сейчас с manualshive.com и улучшите свой опыт использования этого продукта."

Поделиться
Скачать
background image

5-64

N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL

PRODUCT SETUP

CHAPTER 5: SETTINGS

5

inst name must form an LDName that is unique within the network for proper operation. It is recommended that the 
length of the IED NAME plus the length of this setting be not greater than 64 to respect the requirements of IEC 61850 7 
2:2010 22.2 for LDName.
The factory default configuration is for six logical devices with Product LD inst name settings and logical node 
assignments as per the following table.

Table 5-10: Factory default logical nodes

Functional ldName

Range: 0 to 64 VisibleString characters
Default: empty string

Each logical device has this setting. The value is configurable in all logical devices. Valid characters are upper and 
lowercase letters, digits, and the underscore (_) character. If the number of characters entered is greater than zero, the 
setting sets the value of the function-related name used in communications. If an ldName is entered, it must form an 
LDName that is unique within the network for proper operation. The standard recommends choosing this name 
according to IEC 81346-1. If the number of characters entered is zero, no function-related name is defined.

configRev

Range: 0 to 255 ASCII characters
Default: 

This data attribute is provided by the protocol to declare changes to the semantic of the data model of the UR. The intent 
is that the user changes Master configRev each time that the semantic or data model changes, so that clients can 
readily detect the change. A semantic change is a logical node getting a new semantic use; for example, an instance of 
logical node CSWI is now serving a different physical switch, or an instance of a logical node PDIS is now used for 
another zone. A data model change is a change in the presence of logical nodes, data objects, data attributes, or 
instance names.
The scope of Maser configRev is the entire relay configuration, as the Master logical device is the root logical device. 
Similar settings are provided for the other logical nodes; the scope of these other configRev settings is limited to the 
corresponding logical device configuration.

paramRev

Range: -2,147,483,648 to 2,147,483,647
Default: 0

The configurable data attribute paramRev has a scope that includes the entire device, and thus is modified whenever 
any setting in the device changes. The UR increments the value of paramRev by one whenever one or multiple setting 
changes occurs in one Modbus write request by any means (front panel, Modbus, or MMS) other than by SCL file 

Default logical 

device inst name

Contains logical nodes modeling...

Master

(root logical device; 

name is fixed)

communications, including GOOSE, reports, Remote I/O, Virtual Inputs, Modbus, DNP, and so on.

Setting group control.

This is the root logical device.

To comply with IEC 61850 7 1 Ed2 clause 6.4.5.1, all group L logical nodes (logical nodes with class names 

begin with "L"), except LLN0, belonging to this IED are in this logical device.

Protection (Prot)

protection functions

Control (Ctrl)

control and monitoring functions

System

power system devices: breakers, switches, CTs, VTs, and so on, including interface to these such as AC inputs, 

contact I/O, transducer I/O, HardFiber I/O

Metering (Meter)

metering and measurement (other than PMU), including Signal Sources

General (Gen)

FlexLogic, virtual outputs, non-volatile latches, FlexElements, FlexMath, recording (for example oscillography), 

security, front panel, clock

Throughout the remainder of this IEC 61850 section, <LDName> is a syntactic variable representing the present 
LDName of the master logical device. In other contexts LDName can refer to some other logical device. Depending 
on its context, <LDName> can be a product-related name or a function-related name.

Содержание N60



























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для N60

D-Link DSN-640 Quick Installation Manual preview
DSN-640
Бренд: D-Link Страницы: 40
GARDTEC 800 User Instructions preview
800
Бренд: GARDTEC Страницы: 48
FAAC 740 D User Manual preview
740 D
Бренд: FAAC Страницы: 64
Vacon NX series Maintenance Manual preview
NX series
Бренд: Vacon Страницы: 64
tams elektronik HELIOS Manual preview
HELIOS
Бренд: tams elektronik Страницы: 60
Keba Kemro K2 Project Engineering Manual preview
Kemro K2
Бренд: Keba Страницы: 16
KEB COMBIVERT F5 Safety Manual preview
COMBIVERT F5
Бренд: KEB Страницы: 16
Yoshitake BSV-10F Quick Start Manual preview
BSV-10F
Бренд: Yoshitake Страницы: 4
YOKOGAWA TC 10-L Engineering Manual preview
TC 10-L
Бренд: YOKOGAWA Страницы: 20
YOKOGAWA UTAdvanced UT32A Technical Information preview
UTAdvanced UT32A
Бренд: YOKOGAWA Страницы: 3
D+H RZN 4402-K V2 Original Instructions Manual preview
RZN 4402-K V2
Бренд: D+H Страницы: 32
Idex Pulsafeeder MPC Vector Installation, Operation & Maintenance Manual preview
Pulsafeeder MPC Vector
Бренд: Idex Страницы: 114
Bender CC613-H Series Manual preview
CC613-H Series
Бренд: Bender Страницы: 28
Hirschmann PRS 80 Operators & Service Manual preview
PRS 80
Бренд: Hirschmann Страницы: 48
Nibe RMU S40 Installer Manual preview
RMU S40
Бренд: Nibe Страницы: 84
IBC control F21009301 Manual preview
F21009301
Бренд: IBC control Страницы: 16
BABYTREND Expedition Double Jogger Instruction Manual preview
Expedition Double Jogger
Бренд: BABYTREND Страницы: 18
Abus Security Center AZ5140 Installation Manual preview
Security Center AZ5140
Бренд: Abus Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды