11
SIDE PANELS
Side panels must be used whenever the sides of the unit
will be exposed. The 1/4” side panels will slip into the
side case trim. Secure the panels to the unit with stick-
on hook and loop fastener strips. Order the side panels
from the cabinet manufacturer.
• Cut a notch in the top front corner as shown to allow
clearance for corner keys in the front side trim.
ZUG2 GRILLE PANEL DIMENSIONS
The ZUG2 unified grille panel kit provides for the
installation of a framed or overlay grille panel.
* Depending on
installation height.
Assemble the overlay panels in the same manner
as the door panel.
Framed Panel Dimensions
A (Width)
B (Height)
1/4” Framed Panel
69-7/8”
8-7/8”
Overlay Panel Dimensions
A (Width)
B (Height)
1/4” Backer Panel
69-7/8”
8-7/8”
0.10” Spacer Panel
68-1/2”
7-5/8”
3/4” Overlay Panel
70-1/8”
9”
IMPORTANT NOTE: The maximum weight for the
unified grill is 25 pounds.
Design Guide
*84"
2-9/16"
24"
*3" to 4"
3/16"
1-7/8"
SIDE CLEATS
(Flush Installation Only)
Wood cleats are required to be installed vertically
down both sides of the cabinet opening to provide
depth stop for the refrigerator when installed into the
opening.
The front of the cleat should be installed 5-1/4” from
the front of the cabinet opening.
5-1/4”
Finished
Cleat
Case Trim
1/2”
3/4” Panel
DOOR
TOP VIEW
ZUGF2 GRILLE PANEL DIMENSIONS
(Flush Installation Only)
The ZUGF2 unified grille panel kit provides for the
installation of a flush grille panel.
74-1/2”
9-5/8”
Содержание Monogram ZIRS360NNLH
Страница 30: ...Notes 30...
Страница 31: ...Notes 31...