GE Monogram ZIRS360NNLH, Руководство по установке

Страница: 9 / 32

Design Guide
9
3/4” OVERLAY PANEL DIMENSIONS
(Flush Installation Only)
For a more custom appearance, overlay panels may be
installed to give a flush appearance with surrounding
cabinets. The overlay panel must be 3/4” thick. Panel
attaches to included brackets to provide mounting to the
appliance door.
NOTE: We recommend that decorative panels have inside
corners and edges rounded or beveled by cabinet maker
to avoid sharp edges on the panels. Edges to be treated
should include the top, bottom and hinge side edges.
IMPORTANT NOTE: Maximum total weight for the assembled
panels:
•
Door panel – 67 lbs.
•
Grille Panel – 18 lbs.
1/2”
1/2”
1-1/4” 1”
1-1/4” 1”
Top/Bottom Hinge
Clearance
Router 1/8” Deep
Grille Panel
Door
Panel
38"
9-5/8"
69-13/16"
CUSTOM HANDLE DESIGN GUIDE
(Flush Installation Only)
For custom handle installation, counterbore holes in
rear of decorative panels may not exceed 1/4” depth
to ensure 1/2” material thickness remains for handle
support. NOTE: The counterbore must not exceed 1” in
diameter.
Minimum distance from
handle side edge to handle
center should be 2-1/2” as
shown.
1/4”
1/2”
3/4”
2-1/2”
Improper installation can lead to a finger pinch
point hazard between the side door trim and the
cabinets when operating the door, especially
with children. To minimize this risk you must
follow the installation instructions for cabinet
dimensions, trim assembly, and door stop angle.
Door Trim Pinch Point Hazard
WARNING