GE MDS Mercury Series, Справочное руководство

Страница: 91 / 196

05-4446A01, Rev. C Mercury Reference Manual 83
5. When the next screen appears ( Figure 3-48 ), press
A
to select the
desired data baud rate and
B
to select the data byte format. Press
N
to
continue.
Figure 3-48. Select Data Baud Rate and Byte Format
6. The screen shown in Figure 3-49 appears next. Press
A
to select the
Buffer Size of message packets, and
B
to select the Inter-Frame
Delay. Press
N
to continue with the wizard.
Invisible place holder
Figure 3-49. Buffer Size and Inter-Frame Delay Values
7. On the next screen ( Figure 3-50 on Page 84 ), select
A
and use the
spacebar to enable the serial port for data communication. Press
N
to
continue the wizard.