GE MDS Mercury Series, Справочное руководство

Страница: 106 / 196

98 Mercury Reference Manual 05-4446A01, Rev. C
•
Maximum Receive Errors
—Select this item to change the maxi-
mum allowable number of receive errors. When the number of
errors exceeds this number, a redundancy switchover occurs.
[
0-1000; 500
]
3.9 GPS CONFIGURATION (REMOTE
ONLY)
This menu allows you to view or set important parameters for the
built-in Global Positioning System (GPS) receiver in the Mercury
Remote.
Invisible place holder
Figure 3-67. GPS Configuration Menu (Remote Only)
•
Stream GPS to Console
—Used to enable/disable streaming of
GPS NMEA data to the console port (
COM1
). Baud rate is 4800
baud when Stream GPS to console is enabled.
[
enabled, disabled; disabled
]
•
GPS to Console Baud Rate
—The serial baud rate when GPS
streaming is enabled.
•
Send GPS via UDP
—Used to enable/disable sending GPS NMEA
data to a server via UDP. [
enabled, disabled; disabled
]
•
GPS UDP Server IP Address
—Specify the destination address for
GPS NMEA UDP packets. [
any valid IP address; 0.0.0.0
]
•
GPS UDP Server UDP Port
—Destination UDP port for GPS
NMEA UDP packets. [
valid UDP port number; 0
]
•
GPS Streaming Configuration
—A submenu for setting GPS
NMEA outputs. (See Figure 3-68 on Page 99 .)