GE Legend IP, Руководство пользователя

Страница: 104 / 140

Legend IP
User Manual
96
Exit
To exit the programming interface, do the following:
1. You can exit the programming interface two ways. Select Exit or go directly to step 2.
2. At the SEE MONITOR FOR MENUS display
on the keypad LCD ( Figure 71 ), press and
hold the seq key on the keypad (if you are
using a GE KTD-400, KTD-404, or KTD-
405 keypad).
Figure 71. SEE MONITOR FOR MENUS display
3. At the ENTER CAMERA SITE NUMBER
display ( Figure 72 ), press .
Figure 72. ENTER CAMERA SITE NUMBER display
4. At the equipment selection display
( Figure 73 or Figure 74 ), press .
Note: This display will be slightly different
depending on the version of your keypad.
See
Figure 73 and Figure 74 .
Figure 73. Equipment selection display (v1.2.09 or later)
Figure 74. Equipment selection display (v1.1.06 or earlier)
SEE MONITOR FOR MENUS
HOLD SEQ (3 SEC) TO EXIT
ENTER CAMERA SITE
NUMBER _ _ _
BACK
1=SWITCHER/MPLX 2=ALARMS
3=CAMERA EXIT
1=SWITCHER/MPLX 2=ALARMS
3=CAMERA/RCVR EXIT