GE Legend IP, Руководство пользователя

Страница: 69 / 140

Chapter 5
Advanced programming
61
Edit page
The Edit page is where you program your presets. You can select any preset number, whether previously
programmed with a preset position or not. You can reassign new positions to existing presets. After you have
selected a number, you will select the Program button and program the preset position. After setting the
position, you can use the
Display and Advanced pages to program additional characteristics for the preset such
as title and specific exposure modes, if needed.
To access the Edit page of Presets , select Actions , Presets , and Edit .
Figure 45. Edit page
Note: Remember to select OK to save any changes you make on the page.
No. The No. drop-down box allows you to select the preset number that you want to program or
reprogram.
Title. The Title box shows you the existing title for the selected preset number. You can customize the
default title on the Display page.
Image freeze. The Image freeze feature enables or disables image freeze, or uses a default freeze setting,
for displaying the video on the monitor screen as the camera travels between presets.
Selecting On (enabling Image freeze ) sets the camera to freeze the last image while the camera is
moving. A static image will show on the monitor screen until the camera stops. Selecting Off
(disabling
Image freeze ) sets the camera to zoom out as it is moving and to zoom in when it arrives at
its destination. Selecting Default uses the setting selected for the Default preset freeze feature under
Camera | Settings | Page2 (see Page2 tab on page 54).
Be aware that the Transition feature (Freeze or Zoom out) must be programmed separately when
presets are programmed into macros. See Program page on page 68. Choices are Default, Off
(default), and On.
Show. The Show button displays the preset that is currently selected. The screen will say “Show preset” in
the upper left corner. Press iris +/- , esc , or set ( ) to return to the menus.