GE Legend IP, Руководство пользователя

Страница: 132 / 140

LegendIP
User Manual
124
Prerequisites
For streaming between a Legend IP and a SymNet to work without SymSecure or SymNav, there are a few
prerequisites:
• Both devices must be on a network;
• The Legend IP must be running firmware version 3.1 or higher, and;
• The SymNet must be running the following:
•
Software version 1.45h;
• Boot code version 1.01, and;
• MPEG SW version 1.09.
Firewall configuration
If one or more firewalls exist between the Legend IP and SymNet, the following connections must be allowed:
• Port 80/TCP must be open for inbound connections from the managing computer during the initial
configuration;
• Port 1024/TCP must be open for connections from the Legend IP to the SymNet;
• Port 8090/UDP must be open for sessions from the Legend IP to the SymNet, and;
• Port 8092/TCP must be open for connections.
SymNet configuration
To configure the SymNet, do the following:
1. Log on to the SymNet with your web browser.
2. Access the Network Settings page ( Figure 80 on page 125) to make sure the SymNet listen port is set
to 1024. If you change this, the device will prompt for a reboot. Wait for the reboot to complete before
continuing on to the next step.