GE Legend IP, Руководство пользователя

Страница: 18 / 140

Legend IP
User Manual
10
Overview
Now that users can access a dome’s programming menus over a network, you need to understand what is
different about using a computer versus a keypad, when is logging in necessary, and how are multiple users
handled. See the following sections.
Computer versus keypad access
From a computer, you can use the web-based version of the graphical programming interface, or from a
keypad, you can use the analog graphic menu version on a security monitor. Both step through the same
programming menus. Both record changes instantly.
When is logging on necessary
If passcodes were turned on (that is, specified) during installation or later, access to the programming interface
will be passcode-protected and you will have to log on to the dome to program it. Otherwise, you will be taken
directly to the main programming page from the web browser or keypad without the need to enter a passcode.
The passcodes control who has access to the features of your dome. See
Passcode page on page 35.
Multiple users
Multiple users can access the programming menus from different locations (computers and/or keypads) and the
dome will process programming changes in the order they are received. Any conflicting changes will be
responded to with an error message.
Using a computer
When you are using a computer to access the dome’s graphical programming interface, you will be using a web
browser. SymNav cannot access the programming menus. You can access the programming menus and video
using Internet Explorer 6.0, or higher. The browser cannot control the camera unless Java
®
is installed on your
computer, however. If you do not already have Java installed on your computer, go to www.java.com and
download it now.
To access the programming interface using a web browser:
1. At the computer’s desktop, double-click the web browser icon.
2. Type the camera’s IP address into the address field in the form of
http://xxx.xxx.xxx.xxx
(where xxx.xxx.xxx.xxx is the IP address of your camera). The default IP address will be provided by
the installer.
The video and control screen will appear ( Figure 6 on page 11).