background image

30

49-2000492  Rev. 0

Staple your receipt here. Proof of the original purchase 

date is needed to obtain service under the warranty

.

GEAppliances.com

All warranty service is provided by our Factory Service Centers, or an authorized Customer Care

®

 technician. To 

schedule service online, visit us at 

geappliances.com/service_and_support/

, or call GE Appliances at 800.GE.CARES 

(800.432.2737). Please have your serial number and your model number available when calling for service.
Servicing your appliance may require the use of the onboard data port for diagnostics. This gives a GE Appliances factory 
service technician the ability to quickly diagnose any issues with your appliance and helps GE Appliances improve its 
products by providing GE Appliances with information on your appliance. If you do not want your appliance data to be 
sent to GE Appliances, please advise your technician not to submit the data to GE Appliances at the time of service.

What GE Appliances will not cover:

Ŷ

Service trips to your home to teach you how to use 
the product. 

Ŷ

Improper installation, delivery, or maintenance. 

Ŷ

Failure of the product if it is abused, misused, 
modified, or used for other than the intended purpose 
or used commercially. 

Ŷ

Replacement of house fuses or resetting of circuit 
breakers.

Ŷ

Damage to the product caused by accident, fire, 
floods, or acts of God. 

Ŷ

Damage to finish, such as surface rust, tarnish, or small 
blemishes not reported within 48 hours of delivery.

Ŷ

Incidental or consequential damage caused by 
possible defects with this appliance. 

Ŷ

Damage caused after delivery.

Ŷ

Product not accessible to provide required service.

Ŷ

Service to repair or replace light bulbs, except for LED
lamps.

GE Appliances Limited Warranty

EXCLUSION OF IMPLIED WARRANTIES

Your sole and exclusive remedy is product repair as provided in this Limited Warranty. Any implied warranties, 
including the implied warranties of merchantability or fitness for a particular purpose, are limited to one year or 
the shortest period allowed by law. 

This limited warranty is extended to the original purchaser and any succeeding owner for products purchased for home 
use within the USA. If the product is located in an area where service by a GE Appliances Authorized Servicer is not 
available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized GE 
Appliances Service location for service. In Alaska, the limited warranty excludes the cost of shipping or service calls to 
your home.
Some states do not allow the exclusion or limitation of incidental or consequential damages. This limited warranty 
gives you specific legal rights, and you may also have other rights which vary from state to state. To know what your 
legal rights are, consult your local or state consumer affairs office or your state’s Attorney General. 

Warrantor: GE Appliances, 

a

 Haier 

company

Louisville, KY 40225

Extended Warranties:

 Purchase a GE Appliances extended warranty and learn about special discounts that are 

available while your warranty is still in effect. You can purchase it online anytime at

geappliances.com/service_and_support/shop-for-extended-service-plans.htm

or call 800.626.2224 during normal business hours. GE Appliances Service will still be there after your warranty expires.

For the period of

GE Appliances will replace

One year

From the date 
of the original 
purchase

Any part

 of the cooking product which fails due to a defect in materials or workmanship. 

During this 

limited one-year warranty

, GE Appliances will provide, 

free of charge

, all labor 

and related service costs to replace the defective part.

LIMITED W

ARRANTY

Содержание KITCHEN HUB UVH1301

































Отзывы: