GE KITCHEN HUB UVH1301 Скачать руководство пользователя страница 26

Страница: 26 / 32

49-2000492 Rev. 0

Installation Instructions

C. OUTSIDE BACK EXHAUST

(Horizontal Duct) (Cont.)

USE TOP CABINET TEMPLATE
FOR PREPARATION OF TOP
CABINET

You need to drill holes for the top support screws
and a hole large enough for the power cord to fit
through.

• Read the instructions on the TOP CABINET

TEMPLATE.

• Tape it underneath the top cabinet.
• Drill the holes, following the instructions on the TOP

CABINET TEMPLATE.

CAUTION

Wear safety goggles when

drilling holes in the cabinet bottom.

ADJUST BLOWER EXHAUST

The unit is shipped in the top exhaust configuration.
To adjust the unit to back exhaust remove damper
mounting plate and reposition such that opening is
in the back of the unit.

CAUTION

Wear gloves to protect against

sharp edges.

1. Remove 3 screws as shown and save.
2. Remove damper mounting plate by removing

screws.

3. Reposition damper mounting plate such that

opening is in the back of the unit.

4. Reattach screws.

ASSEMBLE AND INSTALL
ADAPTER

1. Remove the tape from the damper.

Make sure

that the damper pivots easily before mounting
the unit

You will need to make adjustments to assure
proper alignment with your house exhaust duct
after the unit is installed.

2. Position the unit damper to back of the unit and

secure it with the screws that were removed.

NOTE:

Damper must hinge at the top as shown

below.

INSTALLATION INSTRUCTIONS

Содержание KITCHEN HUB UVH1301

































Результаты поиска

Содержание KITCHEN HUB UVH1301

Отзывы:

Похожие инструкции для KITCHEN HUB UVH1301

Бренды по названию

Популярные бренды

GE KITCHEN HUB UVH1301, Руководство пользователя

Результаты поиска

Содержание KITCHEN HUB UVH1301

Отзывы:

Похожие инструкции для KITCHEN HUB UVH1301

Бренды по названию

Популярные бренды