GE GRCR3960ZWW, Инструкция по использованию и уходу, Страница: 17 / 64

17
Safety Instructions
Operating Instructions
Care and Cleaning
Installation Instructions
Tr
oubleshooting T
ips
Customer Ser
vice
Oven Controls
Electronic Convection Control with Rotary Switch
Your stove may have one of several different oven controls. Refer to the separate set of instruction if your stove does not
have an electronic oven control with rotary switch.
Minute Timer
You may set the MINUTE TIMER to time cooking or other
household activities for up to 11 hours and 59 minutes.
The
MINUTE TIMER
does NOT control oven functions.
The
MINUTE TIMER
counts down (with the colon
flashing ), one minute at a time. For times less than 1 hour,
both minutes and seconds are displayed. When the last
minute is reached, the time will
beep . When the display
reaches
“0:00”
, the
TIMER
will beep once, and then once
every 10 seconds for the next 10 minutes (or until the
TIMER
button is pressed).
How to set the MINUTE TIMER
1. Press the
TIMER
button. (The green
TIMER
indicator
light will start flashing and “0:00” will flash in the
display).
2. Press the
UP/DOWN ARROW
buttons to enter the
desired time. (i.e. 1:30 for one hour and 30 minute
countdown).
3. Five seconds after the
UP/DOWN ARROW
buttons have
been pressed for the last time, the countdown will
begin, and the
TIMER
indicator light will stop flashing .
4. To check the time-of-day during countdown, press the
CLOCK
button.
5. When the countdown time reaches “0:00” , the TIMER
will beep .
6. Press the
TIMER
button to cancel the beeping , and
return to the
CLOCK
display.
7. To cancel the TIMER before the set time is reached,
press the DOWN ARROW button until “0:00” is
displayed. After 5 seconds, the control will return to the
CLOCK
display.
Clock
The CLOCK tells the time of day and must be set to the
correct time for the automatic oven timing function to
work properly. The
CLOCK
cannot be set during a
TIMED
BAKING
or
SELF-CLEANING
cycle.
NOTE: Pressing an UP or DOWN ARROW button will
change the time by increments of 1 minute. Pressing and
holding the
UP
or
DOWN ARROW
button will change the
time in 10 minute increments.
To set the clock
1. Press the CLOCK button. (The green CLOCK indicator
light will start flashing , and a time with a flashing colon
will appear in the display, (i.e. “12:00”.)
2. Press the UP/DOWN ARROW buttons until the correct
time is set. (i.e. “12:30”).
3. Five seconds after the
UP/DOWN ARROW
buttons have
been pressed for the last time, the CLOCK indicator light
will go out, the colon will stop flashing , and the
CLOCK
will be set.
4. If the
UP/DOWN ARROW
buttons are not pressed within
25 seconds, the CLOCK mode is cancelled and the
indicator light goes out.
Power failure
If the display is flashing, (i.e. “12:00”), there has been a
power failure. Reset the
CLOCK to the correct time as
described above.
If the oven was in any heating mode before the power
failure, it will remain
off after the power failure. To reset,
turn the selector switch to OFF and then to the desired
heating mode.