GE DINAMAP ProCare 100, Руководство по обслуживанию

Страница: 33 / 96

2-14 ProCare Partient Monitor Service Manual Revision A
2009381-001
Product Description: 2.6. Specifications
Sensor Connect/Disconnect from Monitor
The monitor detects the attachment or disconnection of a
sensor from the Monitor within 5 seconds.
Pulse Detection
The Monitor detects a pulse of enters a no-signal state
within 15 seconds of being attached to a patient.
Loss of Pulse
the monitor detects loss of pulse from patient and enters a
no signal state within 10 seconds.
Nellcor Sensors - SpO
2
Range 70% to 100%
OxiMAX Sensor Models Single Patient Use
MAX-A,* MAX-AL* ±2
MAX-N
†
*
±2
MAX-P* ±2
MAX-I* ±2
MAX-R
‡ ±3.5
OxiCliq Sensor Models Single Patient Use
OxiCliq A ±2.5
OxiCliq P ±2.5
OxiCliq N
† ±2.5
Reusable Sensor Models
D-YS ±3
D-YS & D-YSE ±3.5
D-YS & DYSPD ±3.5
DS-100A ±3
OXI-A/N ±3
OXI-P/I ±3
* The accuracy specification under motion conditions is ±3. For a definition of motion contact GE Medical Services
Technical Support.
† The MAX-N and the OxiCliq N were tested on patients > 40 kg.
‡ The accuracy specification has been determined between saturations of 80-100%
SpO
2
- Masimo Oximetry
Saturation Range 1% - 100%
Pulse Rate and Accuracy 25-240 BPM ±3 digits
Perfusion Range 0.02 to 20%
SpO
2
- Nellcor Pulse Oximetry