GE AV-300i, Руководство пользователя, Страница: 32 / 296

GEH-6641E
—————— Function Description ——————
32
Ch.1
Std enc supply
Std sin enc Vp
Exp enc type
Exp enc pulses
Rep/Sim encoder
Index storing
Save config ?
Encoders config
Speed feedback
Int spd fbk sel Encoder input selection:
Std encoder
standard encoder input (default)
Exp encoder
expanded encoder input, using option cards:
6KCV301ENC
6KCV301D14A4F
Spd fbk sel src
Command source for the selection of the encoder used for
speed feedback (factory setting: Int spd fbk sel)
Std enc type
Encoder type connected to the std input, it can be selected as:
Frequency input
digital single channel frequency input: channel A.
5V must be connected between A and power
supply common.
digital
digital encoder (factory setting)
sinusoidal
sinusoidal encoder, select the correct jumper settings on the
regulation card, RV33 - 1 (see section 1.6 in the Hardware Guide)
Std enc pulses
Encoder pulses per revolution (ppr) value of the standard input (factory setting =1024 ppr)
Std dig enc mode
measuring method of the digital encoder speed connected to the
standard input. It can be:
FP
frequency and period measuring.(factory setting)
F
frequency measuring
The FP mode has a higher resolution (position can drift with a 0 reference),default value.
The F mode has lower resolution at high speeds, but is better at low speeds by varying
the drive’s encoder scan rate. This provides low drift at 0 Reference.
Std enc supply
Power supply voltage of the standard Encoder input.
It can be selected among
6.16, 5.91, 5.68, 5.41 V
to compensate long motor length cable (factory setting =
5.41 V
)
Std sin enc Vp
Peak voltage value of the sinusoidal encoder connected to the
standard input. Range between
0.5V
(default value) and
1.5V.
Exp enc type
encoder type connected to the Exp input, it can be selected as:
Digital
digital encoder
Frequency input digital single channel frequency input: channel A.
5V must be connected between A and power
supply common.