—
31
—
Operating Procedures / Photos
Disassemble Pump Assy,
Pump and Water Level Switch
Use socket wrench to twist off the three nuts
beside the pump assy, and then manually pull
the pump assy upward to remove it.
Use screwdriver to screw off the four screws
beside the pump.
Use screwdriver to screw off the two screws
beside the water level switch.
(refer to Figure 8-16 , 8-17 and 8-18)
Disassemble Filter, Angle
Inner Cover and Stepping Motor
Push the two clasps inward, pull the filter
backward, Use screwdriver to screw off the
eight screws at the corner inner cover, and
remove the corner inner cover. Use
screwdriver to screw off the two screws
beside the stepping motor to remove the
stepping motor. Remove the filter.
(refer to Figure 8-19 , 8-20 and 8-21)
Figure 8-16
Pump
Water Level Switch
Screw
Figure 8-17
Figure 8-18
Screw
Filter
Clasp
Figure 8-19
Screw
Figure 8-20
screw
Содержание AIR C18
