GE AIR C18, Руководство по установке

Страница: 26 / 60

—
23
—
7.4 Installation of Remote Controller Battery
z
Operating Guideline
General Procedures:
1. Switch on the power and press ON/OFF key to start the air conditioner.
2. Press MODE key to select your desired run mode.
3. Press SWING key to enable the guide louver to swing at a specific angle. Press it again to stop the swing.
4. Press FAN key to set the fan speed.
5. Press +/- key to set your desired temperature.
Optional Procedures:
6. Press SLEEP key from remote controller to set the sleep mode.
7. Press AUTO ON/OFF key and then press +/- key to set the timer.
Note: When auto mode is selected, the air conditioner will automatically select an appropriate run mode according to the
indoor temperature, making the environment comfortable.
z
Replacement of Remote Controller Battery
Two pieces of 7# alkali dry batteries are used in the remote controller.
1. Slide the battery cover of remote controller downward. Remove the old batteries and replace with two pieces of new
batteries (Take care that the polarity shall be correct)
2. Close the battery cover of remote controller.
Note:
z
Do not use new batteries together with
old batteries, or use different types of
batteries together.
z
To avoid leakage of liquid and damage
to the remote controller, please take
out the batteries if you will not use the
remote controller in several weeks.
z
Operate the remote controller within
effective range.
z
Keep the remote controller at least 1
meter away from television set or
sound equipment.
Battery cover
RESET key
Insert two 7# batteries.