![background image](http://html.mh-extra.com/html/ge/air-c18/air-c18_service-manual-installation_122415031.webp)
—
28
—
8.2 Disassembly Procedures of Indoor Unit
Operating Procedures / Photos Applicable Unit Models: GE AIR C24, C34, C41 IN
Disassemble Front Grill Sub-Assy
Push the left and right clasps of the front grill to
the center and lift them at the same time. After
the front grill is in the 45
°
angle position, pull it
backward. (refer to Figure 8-1)
Disassemble Front Panel
Manually unplug the connection joints of guide
louver motor cable and the limit switch cable. At
the left clasp, use screw driver to twist off the
screw of electric box cover
Ⅱ
, Disassemble the
electric box cover
Ⅱ
and then unplug the 6-core
cable plug. At the left clasp, manually pull the
four corner outer covers outward to remove
them. Use screwdriver to screw off the four
screws, turn the front panel anticlockwise, and
then pull it upward to remove it. (refer to Figure
8-2, 8-3 and 8-4)
Disassemble Water Tray
Manually unplug the socket connector of motor
cable. Use screwdriver to screw off the screw
fixing the temp. sensor and the motor cable.
Push the water level switch cable, water pump
cable and temp. sensor cable aside. Use
screwdriver to screw off the four screws and pull
the water tray upward to remove the water tray.
(
refer to Figure 8-5, 8-6 and 8-7
)
Figure 8-5
Left Clasp
Right Clasp
Figure 8-1
6-core cable
plug
Electric Box
Cover II
Electric Box
Cover I
Figure 8-2
Figure 8-3
Figure 8-4
Corner Outer Cover
Screw
Electric Box Cover I
Screw
Содержание AIR C18
