CS875-575-375-275-175 Installers Manual with CS5500 keypad
B.2.26
2.4.4.3.3.7
RF Sensor Lost
A menu entry that groups report codes sent to the central station when an RF
sensor lost event occurs.
2.4.4.3.3.8
RF Low Battery
A menu entry that specifies the code (SIA/ContactID/FastFormat/200Bd FSK)
or voice channel to be used for RF Low Battery events.
2.4.4.3.4
Keypad
A menu entry that groups the report codes sent to the central station for
keypad related events.
2.4.4.3.4.1
Duress
A menu entry that groups the report codes sent for a duress event.
A duress situation is one in which a user is being threatened and forced to
disarm the system. A duress code is entered to disarm the system as normal
and a duress alarm is activated.
2.4.4.3.4.2
Keypad Tamper
A menu entry that groups the report codes sent for the keypad tamper event.
2.4.4.3.4.3
Keypad Panic
A menu entry that groups the report codes sent for the keypad panic event.
2.4.4.3.4.4
Keypad Aux 1 (Fire)
A menu entry that groups the report codes sent for the keypad aux 1 (fire)
event.
2.4.4.3.4.5
Keypad Aux 2 (Medical)
A menu entry that groups the report codes sent for the keypad aux 2 (medical)
event.
2.4.4.3.5
Power
A menu entry that groups report codes that are sent to the central station when
power related events occur.
2.4.4.3.5.1
Mains Failure
A menu entry that groups the codes used to report a mains failure event.
2.4.4.3.5.2
Low Battery
A menu entry that groups report codes sent to the central station for a low
battery event. A restore report is sent to the central station when this condition
is no longer active.
2.4.4.3.5.3
Aux Overcurrent
A menu entry that groups the report codes sent to the central station when an
overcurrent event occurs.
2.4.4.3.6
Communications
A menu entry that groups together the codes used to report communication
events to the central station.
2.4.4.3.6.1
Phone Line Cut
A menu entry that groups the report codes sent when a phone line is cut.
2.4.4.3.6.2
Fail to Communicate
A menu entry that groups the report codes sent to the central station when a
fail to communicate event occurs.
2.4.4.3.6.3
Autotest
A menu entry that groups the report codes sent to the central station when an
autotest is performed.
2.4.4.3.7.1
Log Full
A menu entry that groups the report codes sent to the central station when the
event log is full.
2.4.4.3.7.2
Start Programming
A menu entry that groups the reporting codes sent to the central station when
programming starts.
2.4.4.3.7.3
End Programming
A menu entry that groups the report codes that are sent to the central station
when the installer leaves programming mode.
2.4.4.3.7.4
End Download
A menu entry that groups the report codes sent to the central station when
downloading is complete.
2.4.4.3.8
Zones 200Bd FSK
A menu entry that groups 200Bd FSK protocol options.
2.4.5
Format Override
A menu option that allows you to build communication formats if using a non-
standard central station. Consult technical support before using this option
.
2.4.5.1
Features 1
A menu option that allows you to configure your own reporting protocol based
on the options enabled.
Location
Term
Definition
