CS875-575-375-275-175 Installers Manual with CS5500 keypad
B.15.9
15.2.2.1.2.2.4
Siren/Phone Faults and Restores
A menu option that sends a report to the selected email account when a siren
or phone fault occurs. A restore report is sent when the fault is fixed.
15.2.2.1.2.2.5
RF Sensor Lost and Restores
A menu option that sends a report to the selected email account when an RF
sensor is missing. A restore report is sent to the central station when the
receiver receives a valid signal from the lost transmitter.
15.2.2.1.2.2.6
RF Low Battery and Restores
A menu option that sends a report to the selected email account when a low
battery condition occurs in an RF sensor. A restore report is also sent when the
low battery condition is no longer active.
15.2.2.1.2.3
Power
A menu entry that groups the power events that are reported to the selected
email account.
15.2.2.1.2.3.1
Power Trouble and Restores
A menu option that reports mains failure, mains restore, low battery and low
battery restore events to the selected email account.
15.2.2.1.2.3.2
Aux Overcurrent and Restores
A menu option that sends a report to the selected email account when too
much current is detected. A restore report is also sent when the overcurrent
condition is fixed.
15.2.2.1.2.4
Communications
A menu entry that groups the communication events that are reported to the
selected email account.
15.2.2.1.2.4.1
Fail to Communicate
A menu option that reports a fail to communicate event to the selected email
account.
15.2.2.1.2.4.2
Test Reports
A menu option that sends a test report to the selected email account at pre-
programmed intervals. The units can be set in days or hours.
15.2.2.1.2.5.1
Program/Download
A menu option that reports programming and up/download events to the
selected email account.
15.2.2.1.2.5.2
Zone Inactivity Monitor
A menu option that sends a report to the selected email account when a zone
inactivity event occurs.
15.2.3
E-mail Server
A menu entry that groups email server options.
15.2.3.1
Domain Name
A menu option that configures the domain name of the email server to which
reports are sent.
15.2.3.2
IP Address
A menu option that configures the address of the selected email server.
15.3
Account Codes
A menu entry that groups account code options.
15.3.1
System Account Codes
A menu option that configures the SIA or Contact ID account numbers for each
report receiver. SIA account numbers are 6 digits long. Contact ID account
numbers are 4 digits long. They must be entered with extra zeros to the left. If
you attempt to use both system account codes and partition account codes,
the partition account codes take precedence.
15.3.2
Partition Account Codes
A menu option that lists the account codes for each partition. The account
code is sent when the relevant partition is reported.
There are two sets of account codes. The first set assigns an account code to
each report destination. The second set assigns an account code to each
partition. If you attempt to use both sets, the partition account code takes
precedence.
15.3.3
Receiver Number
A menu option that configures the phone line receiver number associated with
the receiver account.
15.3.4
Line Number
A menu option that configures the line number associated with the receiver
account.
15.4
Up/Download
A menu entry that groups options used to control download sessions between
the up/download software and the control panel.
Location
Term
Definition
