GE HEALTHCARE MAC 5500, Руководство оператора

Страница: 110 / 188

System Setup
Setting Up Automatic ECG Transmission
Use the following procedure to set up the system to automatically transmit ECGs.
NOTE:
Before setting up automatic transmission, you must define the receiving device,
its default location, and its transmission paramters. Refer to
“Transmission” on
page 116 .
1. Log into the System Setup function.
Refer to “Process Overview” on page 107 .
2. Select ECG > ECG Analysis > Auto ECG Transmission .
A list of options opens.
• All ECGs
• No ECGs
• Only ABNORMAL ECGs
3. Select the desired option and press Return .
4. When you are done, press Return .
Setting Up Signal Averaged ECG Report Printing
This option allows you to select the report format that will print for signal averaged
ECGs.
1. Log into the System Setup function.
Refer to “Process Overview” on page 107 .
2. Select Hi-Res .
A list of available report formats is displayed.
3. Select the type and quantity of formats to print.
4. When you are done, press Return .
Setting Up ACI-TIPI Interpretation
Use the following procedure to set up the system to automatically prompt you for
ACI-TIPI information required for interpretation.
1. Log into the System Setup function.
Refer to “Process Overview” on page 107 .
2. Select ECG .
3. Select ECG Analysis .
4. Do one of the following:
• To enable ACI-TIPI, select Yes in the Enable ACI-TIPI field.
• To disable ACI-TIPI, select No in the Enable ACI-TIPI field.
5. When you are done, press Return .
110
MAC ® 5500/MAC ® 5500 HD
2046275-016B