GE HEALTHCARE E-PSMP, Техническое руководство

Страница: 22 / 622

Module Frames and Modules
2 - 8
2062973-004
1.3.2 E-PSM(P) and E-(P)RE(S)TN modules
The modules contain three main PC boards, the STP board, the ECG board, and the NIBP board.
Each of these boards contain a processor and software in the processor flash memory. The
boards produce their own supply voltages from the Vmod 13.8-16 V line that is available via
the module bus connector. In addition to this, the NIBP board pr5V for the ECG and STP
board non-isolated side components. The NIBP board provides also the synchronization signal
for the ECG and STP board power supplies.
There are two input boards; the STP input board and the ECG input board attached to the front
panel of the module. The front panel has five connectors and four keys. There is one connector
for two temperature measurements, one for two invasive blood pressure measurements, one
for ECG, one for NIBP, and one for SpO2 measurement. The NIBP connector includes two
plungers for NIBP hose identification. The keys are for NIBP Auto On/Off, NIBP Start/Cancel, P1
zero, and P2 zero.
NOTE: The connectors and keys depend on the module variant, and some variants may not
have all the mentioned connectors and keys.