GBT A2-035, Инструкция по установке и эксплуатации

Страница: 5 / 45

Page 4
MODEL IDENTIFICATION
The model number can be found on the Name Plate label, located on the heater/boiler.
A2 - (H,X,B,T,C) - (###) - (NG,LP,NH,LH)
A2 = A2000 Series Water Heater or Boiler
H = Water Heater
X = Water Heater with 2-Stage burner controls
B = Boiler
T = Boiler with 2-Stage burner controls
C = Boiler with ASME CSD-1 controls
### = Nominal Rated Input
NG =
Natural Gas
LP = Propane
NH = Natural Gas, High Altitude
LH = Propane, High Altitude
RATINGS AND CERTIFICATIONS
The A2000 models are certified to the following standards:
•
ANSI Z21.13 – CSA 4.9 Gas-Fired Hot Water Boilers, Latest Edition
•
ANSI Z21.10.3 – CSA 4.3 Gas Water Heaters, Latest Edition
All A2000 models are ASME National Board Approved and are constructed in accordance with Section IV of the
ASME Heater Pressure Vessel Code (160 psi working pressure) and bears the ASME “H” stamp.
Do not alter or replace the heat exchanger without the approval of Green Boiler
Technologies. To do so will void the warranty and the ASME certification.
Ensure the fuel that the appliance will burn is the same as that specified on the boiler rating
plate. Conversions must be completed by a Qualified Service Agency or Gas Provider. Call
your Green Boiler Technologies Representative or Customer Service for instructions and the
proper conversion kit.