- 18_en -
sl320001604 ed.06 - 03-2010
9. TRoUBLEShooTiNG
Problem
Cause
Remedy
The machine does not turn on.
The main switch is off (positioned on “O”). (Chap.6)
Press the switch into position “I”.
The machine is not plugged in.
Insert the plug in a suitable outlet.
The tap leaks (liquid leaks from below).
The tap plug is not lubricated. (Fig.33)
Lubricate the plug and OR.
The plug is defective.
Replace the plug.
The tap leaks (liquid leaks from above).
The OR is defective.
Replace the OR.
The OR is not lubricated.(Fig.33)
Lubricate the plug and OR.
Product leaks from the rear part of the bowl. The bowl is not fitted correctly in place . (Chap.7.5)
Check the positioning of the bowl.
The bowl seal is not lubricated. (Fig.29)
Lubricate accordingly.
The seal is defective.
Replace the seal.
The auger does not turn
The switch is positioned on “O”. (Chap.6)
Press the switch into position “I”.
Blocks of ice inside the bowl.
Switch off the machine, allow the bowl contents to melt
and check that the product has been correctly diluted.
The machine does not make granita.
The switch is positioned on “O”. (Chap.6)
Press the switch into position “I”.
The machine is near sources of heat.
Install the machine in a suitable place.
There is insufficient ventilation.
The condenser is dirty. (Chap.7.8)
Call in a specialized technician to clean the
condenser.
The consistency has not been adjusted correctly.
(Chap.6.4)
Correctly adjust the consistency.
The auger is noisy.
The front seal has been applied incorrectly. (Fig.27)
Check that the seal is applied correctly.
The seal is not lubricated. (Fig.28)
Lubricate the seal accordingly.
The tap does not dispense
Blocks of ice inside the bowl.
Switch off the machine, allow the bowl contents to melt
and check that the product has been correctly diluted.
if the machine malfunctions due to causes other than those listed in this table or the proposed remedies do not solve the problem, contact a special-
ized technician.
7.9. Periodic maintenance
The machine must be periodically checked (at least once a
year) by a specialised technician.
This periodic check serves to ensure that all the components
installed and the machine itself are maintained at a high level
of safety.
Any worn components must be replaced by an original spare part.
it is forbidden to use the machine when even only one of its
components is faulty or worn. Users are forbidden to perform
periodic maintenance.
8. SCRaPPiNG
Electric and electronic equipment must be disposed of in ac-
cordance with European Directive 2002/96/EC.
Such equipment may not be disposed of as normal municipal solid
waste but must rather be separately collected to optimise recovery
and recycling of the materials used to manufacture them.
All products are marked with the crossed out wheeled bin
symbol as
a reminder of separate collection obligations.
Correct observance of all of the provisions for the disposal of end-of-life prod-
ucts will contribute to safeguarding the environment.
Содержание Granitore 1
Страница 47: ...SL320001604 Ed 06 03 2010 23_ES...
Страница 69: ...SL320001604 Ed 06 03 2010 23_EN...
Страница 91: ...SL320001604 Ed 06 03 2010 23_DE...
Страница 113: ...SL320001604 Ed 06 03 2010 23_FR...