GatesAir Intraplex VF-25, Инструкция по установке и эксплуатации, Страница: 21 / 73

2 – Functional Description & Setup Intraplex VF-25 Voice Module
Version 7.1, November 2009
GatesAir, Inc. 2-9
Intraplex Products
A typical VF-25 response to a
CONFIG?
query looks like this:
* OK
CHANNEL CARD 3, TYPE 103
UNDER REMOTE CONTROL
SRVC = ON
P01 = 195 (B11000011)
P02 = 1 (B00000001)
P03 = 124 (B01111100)
P04 = 124 (B01111100)
P05 = 124 (B01111100)
P06 = 124 (B01111100)
P07 = 124 (B01111100)
P08 = 124 (B01111100)
P09 = 124 (B01111100)
P10 = 124 (B01111100);
Table 2-6. Remote Configuration Settings (P Codes)
P Code Digit(s) and Effect Value* Description
P1 B000 00000
--- 
TIME SLOT SELECT
00001
to
11111
From left to right, these five bits represent the binary value of
the starting time slot (Table 2-7).
B00 0 00000
--  -----
0
1 Normal - signaling active
Signaling off (Transmit Only mode)
B 00 000000
 ------
ACTIVE CHANNELS
00
01
10
11 Four channels active
Three channels active
Two channels active
One channel active
P2 B0000000 0
------- 
TERMINAL
0
1 Set to operate through the DI B port in a drop/insert multiplexer.
Set to operate in a terminal multiplexer or by the DI-A port in a
drop/insert multiplexer.
B000000 0 0
------  -
LOCAL LOOPBACK
0
1 Normal - local loopback off
Local loopback active
B0000 00 00
----  --
Not Used
B000 0 0000
---  ----
CH. 1 REMOTE LB
0
1 Normal - Channel 1 remote loopback off
Channel 1 remote loopback active
B00 0 00000
--  -----
CH. 2 REMOTE LB
0
1 Normal - Channel 2 remote loopback off
Channel 2 remote loopback active
B0 0 000000
-  ------
CH. 3 REMOTE LB
0
1 Normal - Channel 3 remote loopback off
Channel 3 remote loopback active
B 0 0000000
 -------
CH. 4 REMOTE LB
0
1 Normal - Channel 4 remote loopback off
Channel 4 remote loopback active