Gates GC32FLEX Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 62

background image

6

GC32FLEX/TSI SAFETY AND OPERATION MANUAL

CRIMPER SAFETY

WARNING

Intended Design Use

Using this machine for other than its intended purpose will void the manufacturer’s warranty and may cause

serious or fatal injury.

Personal Safety

Regardless of local accident prevention regulations, the following procedures should be observed to maintain

the health and safety of operators.
1. Always wear protective clothing and apparatus as outlined in the local accident prevention regulations.
2. Ensure that safety and danger notifications have been observed.
3. Make sure the work area is clear of obstructions and is a suitable work environment.
4. Never start the machine unless intending to make a hose assembly and ensure the head is free of objects

and persons.
5. ONLY operate this machine if the ambient temperature is between 50ºF ~ 95ºF (10ºC and 35ºC)
6. Never reach into the crimper while the head is moving.
7. Never change die sets unless the head is completely open.
8. The power MUST be disconnected from the crimper machine before maintenance.
9. Observe the machine balance point when moving the crimper.
10. Always refer to Safety and Operation Manual for correct procedure when lifting machine.

«
...
6
7
8
9
10
...
»

Содержание GC32FLEX































































Отзывы:

Нет отзывов

Похожие инструкции для GC32FLEX

Бренд: jbc Страницы: 8

Бренд: Anova Страницы: 66

Бренд: ProMaxX Страницы: 2

Бренд: Orion Страницы: 10

Stow & Glo 86475-30-BL-04-001

Бренд: ITC Страницы: 2

Бренд: COFAN Страницы: 34

Бренд: MAG TOOLS Страницы: 3

Бренд: PROPOINT Страницы: 76

Бренд: Westfalia Страницы: 9

Бренд: Powermate Страницы: 16

Бренд: +Collins Youldon Страницы: 25

Бренд: Wurth Elektronik Страницы: 4

Бренд: CABAC Страницы: 12

Бренд: ITE Страницы: 2

Бренд: Haussmann Xpert Страницы: 23

Бренд: molex Страницы: 8

Бренд: WAGNER Страницы: 16

Бренд: Nakanishi Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды