A3 Installation
UltraScan Use
r
’s Guide Reference Series Rev 1.0
XVI
•
Connect the green ground wire on the outlet strip to the microscope
ground.
•
Run the Fiber Optic cable s between the controller and the computer.
A3.5 Shutter-control output
The Shutter-Control output (shown in figure A11) is on a BNC connector on
the back panel of the controller (Figure A7).
•
Connect one end of the Shutter-Interface cable to the Shutter-Control
output on the controller.
•
Connect the other end to the Shutter-Interface provided by Gatan (or
microscope vendor).
A3.6 Shutter-override output
The shutter-override output (shown in figure A11) is on a BNC connector on
the back panel of the controller (Figure A7).
•
Connect one end of the shutter override interface cable to the shutter
override output on the controller.
•
Connect the other end to the shutter-override interface provided by
Gatan (or microscope vendor).
Содержание UltraScan 894
Страница 21: ...Magnification Calibration UltraScan User s Guide Reference Series Rev 1 0 2 13 Figure 2 15 Calibration window...
Страница 30: ...Image Saving and Printing UltraScan User s Guide Reference Series Rev 1 0 3 9 Figure 3 10 Control palette...
Страница 46: ...A2 Description UltraScan User s Guide Reference Series Rev 1 0 VIII Figure A 7 Controller s back panel...
Страница 55: ...UltraScan User s Guide Reference Series Rev 1 0 XVII Appendix 2 CE certification...
