A2
Description
UltraScan Use
r
’s Guide Reference Series Rev 1.0
VI
A2.2 Controller’s back panel
•
Supply Voltage: 100-240 V AC
•
Insulating rating of external circuits: 1500 V
•
Operating Conditions: 15 – 25 C
•
Power Entry Module: AC line voltage is connected through a universal
power cord. The power entry module is compatible with either single or
dual fusing.
Figure A 5
Controller’s back panel: I/O fiber optic, shutter, camera connector
•
I/O (Fiber 1 and 2) (Figure A5): Fiber 1 (output) transmits data from
the Fiber Optic Interface card mounted in the PCI bus of the computer.
Fiber 2 (input) receives data from the controller to the Fiber Optic
Interface card.
•
Outputs (Shutter Override 1 and 2) (Figure A5) : These outputs provide
logic -level signals for control of the TEM shutter.
•
Inputs (Shutter Override 1 and 2) (Figure A5): These inputs are used to
monitor the position of the TEM viewing screen. When a screen down
condition is sensed, the First Light Controller sets both shutter outputs
1 and 2 to open regardless of state requested by the computer. Either
input may be used regardless of shutter configuration.
Содержание UltraScan 894
Страница 21: ...Magnification Calibration UltraScan User s Guide Reference Series Rev 1 0 2 13 Figure 2 15 Calibration window...
Страница 30: ...Image Saving and Printing UltraScan User s Guide Reference Series Rev 1 0 3 9 Figure 3 10 Control palette...
Страница 46: ...A2 Description UltraScan User s Guide Reference Series Rev 1 0 VIII Figure A 7 Controller s back panel...
Страница 55: ...UltraScan User s Guide Reference Series Rev 1 0 XVII Appendix 2 CE certification...
