Gastec GSP-501FT, Инструкция по эксплуатации

Страница: 4 / 55

3
Warning

This product is NOT approved as explosion-proof. Do not use this product in hazardous
locations.
△
Note

Ensure to perform an inspection before use to ensure that the product operates properly.

Avoid water entering in air routing. The suction of water may damage the sampling train (air
pump, flow sensor, etc.).

Do not block the air outlet port. Flow resistance may cause errors in the product flow rate
and integrated volume.

Do not use this product in high temperatures. Malfunction or mechanical failure may result.

This product is not waterproof. Avoid using this product where it may be exposed to water.
Mechanical failure may result.

Dropping or other significant impacts may cause mechanical failure.

Do not use electromagnetic wave generation devices such as professional radios and amateur
radios within 30cm from this product. If electromagnetic wave generation devices are used
near this product, errors may occur in the measured flow rate.

Do not disassemble or modify the product. The safety and quality of the product cannot be
guaranteed.

Be sure to turn off the power before replacing the battery. Mechanical failure may result.

Do not store the product where it may be exposed to direct sunlight.

Do not store the product where the temperature is above 50°C (122°F) or below -10°C (14°F).

Do not store the product in an extremely dry (humidity 10% or less) or high humidity (90%
or higher).

Do not store the product where it may be exposed to water, steam, sand, or dust.
 If the product will not be used for a long time (one month or more), remove the batteries. If
The product is stored with batteries installed may cause battery drain and mechanical failure
due to battery leakage.