Gaspardo GENIUS, Инструкции по использованию и сборке / Запасные части, Страница: 28 / 37

USE AND MAINTENANCE
ENGLISH
g
cod. G19502880
54
5.0 MAINTENANCE
This chapter gives instructions on how to carry out ordinary and extraordinary maintenance.
Ordinary maintenance refers to those operations which must be carried out periodically. As they do not require specific skills, they
can be carried out by the users (operators etc.).
Extraordinary maintenance refers to unforeseeable operations due to mechanic or electric failures. They require specific technical
skills, so they should be exclusively carried out by qualified personnel (maintenance personnel etc.).
5.1 ORDINARY MAINTENANCE
Ordinary maintenance consists in cleaning the instrument. Clean the instrument with a wet cloth and mild detergent to avoid erasing
the serigraphs on the panel.
Warning
- Do not use pressure water jets.
- Do not use abrasive products, solvents or alcohol.
- Do not press on the keyboard with pointed or hard objects in order to avoid damaging the polyester film, thus endangering the
impermeability of the keyboard.
ATTENTION
Store the equipment in a dry and indoor place. Should this not be possible, it is RECOMMENDED
to cover it with a rubber cloth paying attention to the electric devices.
5.1.1 HOW TO PROTECT THE MAIN CONNECTOR
If the GENIUS System is not used for prolonged periods, disconnect the main connector of the wiring and the supply cable. It is
advisable to protect the connectors with Nylon coverings.
6.0 DEMOLITION AND DISPOSAL
This operation is to be carried out by the customer.
Before demolishing the machine, you are advised to carefully check its physical condition and ascertain whether there are any parts
of the structure that may be susceptible to structural collapse or breakage during demolition.
The customer should operate in compliance with the environment protection laws in force in his/her country.
CAUTION
The machine demolition operations should be carried out by skilled personnel only, equipped with suitable protective clothing
(safety footwear and gloves) and auxiliary tools and equipment. All the disassembly operations for demolition should be carried
out with the machine stopped and detached from the tractor.
Before demolishing the machine, you are advised to render harmless all the parts that may be a source of danger and therefore:
- scrap the structure using specialized firms,
- remove any electrical apparatus according to the laws in force,
- collect oils and greases separately, to be disposed of through specialized firms, in accordance with the regulations of the country
in which the machine was used.
When the machine is demolished the CE mark should be destroyed together with this manual.
Finally, we remind you that the manufacturer is always available for any and all necessary assistance and spares.