Gaspardo GENIUS, Инструкции по использованию и сборке / Запасные части, Страница: 22 / 37

USE AND MAINTENANCE
ENGLISH
g
cod. G19502880
48
4.5 CAL TEST
This test is aimed at calculating the quantity of product that is distributed at each metering roller turn.
WARNING
Moving parts!
- Before operating the equipment check that there are no persons, especially children, or pets around the machine, and that
there is good visibility.
- Before the cal test, make sure that there is no foreign matter inside the hopper and metering units.
IMPORTANT
Make sure that the correct metering roller is installed.
Scatola eletrica
Z W
fig. 49 fig. 48
fig. 46 fig. 47
N500
Standards seeds
up to 200 Kg/Ha
(green)
SEEDS
G1000
Standards seeds
over 200 Kg/Ha
(red)
F25-125
Fine seeds
(yellow)
FERTILIZER
G1002
(red)
1) Fit the equipment with the correct metering roller, suitable with the type of product selected.
2) Position the required containers under the two metering units and open the spouts for product discharge (Fig. 48).
3) Put product in the hopper.
4) Turn the switches in the main electrical panel to ON (W in Fig. 49).