Gaspardo GENIUS, Инструкции по использованию и сборке / Запасные части, Страница: 19 / 37

USE AND MAINTENANCE
ENGLISH
g
cod. G19502880
45
fig. 36 fig. 37
4 m
3 4 1 2 3 4 1 2
20 m
SPRAY
5 5
4 m
4 5 6 1 2 3 4 5 6 1
24 m
SPRAY
2 3
4 m
4 5 6 1 2 3 4 5 6 1
24 m
SPRAY
2 3
fig. 38
fig. 40 fig. 39
SETUP OPERATOR SETUP Tramline « »
This menu is used to set the number of passes required for
tramlining and determine the sequence (symmetrical or
asymmetrical) (Fig. 36).
The control unit offers multiple combinations depending on the
drill width of the seed drill and SPRAY bar (Fig. 37). The drill width
of the seed drill is set as instructed in section 4.4.1.
The definition Right (RH) or Left (LH) applies from the machine
back.
TRAMLINE SEQUENCE:
SYMMETRICAL
TRAMLINE SEQUENCE:
“ASYMMETRICAL and LEFT (LH)”
TRAMLINE SEQUENCE:
“ASYMMETRICAL and RIGHT (LH)”